Skip to main content

Popular posts from this blog

VHDL code for Clock Divider

By
This is a clock divider code, just set the max-count value as per your requirenment.

For ex. If I want 1Hz freq. set the max count to i/p freq value viz.
1sec = 1Hz
Then, to get time period of 1sec i.e. 1 Hz frequency set max-count to 240000 as shown below:

1sec  =  24000000  -- for i/p frequency of 24 MHz.

To get your desired frequency just calculate the maxcount with the formula given below:

max_count = 24000000 * (1/your required frequency)


CODE:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48libraryIEEE; useIEEE.STD_LOGIC_1164.ALL; useIEEE.numeric_std.all; entityclk_divisPort ( Clk :instd_logic; rst :instd_logic; op :outstd_logic ); endclk_div; architecturebehavioralofclk_divisconstant max_count :natural:=24000000; -- I used 24MHz clockbeginprocess(Clk,rst) variable count :naturalrange0to max_count; beginif rst ='0'…
25 comments
Read More

RTC on FPGA with manual set synthesizeble VHDL code.

By
Hey there, cheers to VHDL. I successfully added manual set feature in my previous RTC project. I am not going to copy whole code here. I am just adding the links of .vhd files. I also added the pre-compiled .sof file only for DE1 boards. There is a very small bug that while clicking the set button to enable min and hr set, it increments the hr or min value unintentionally. Else everything is working great.

(Input freq 24MHz., top-level entity DigiClock)

14 comments
Read More

16x2 LCD Controller in VHDL

By
Hello Everybody. The LCD 16x2 code is ready. Just one bug which is still not recognized. You need to program code 2 times on board to see it work. I dont know why its behaving like that.

The text data is stored in a HEX file and is loaded onto the ROM of 32x8 byte size. It can be reconfigured easily.

I will be uploading code in short of time with some new features.

And after that be ready for a BMP decoder. Get ready with your pic to be seen on Monitor via FPGA.

Updated:

I didnt made  changes to code, if you program fpga 2 times without turning it off the code works(It worked on my DE1 board)
I have uploaded project compiled for DE1 board, mail me your quiries, and if anyone finds bug in code.

Project zip Download: LCD_TEST.zip
1 comment
Read More